Clamp Stainless Steel 3pc Socket Clamp Ball Valve

     Three-piece ball valves only need to rotate 90 degrees of operation and a small torque to close tight. The main feature of the ball valve is its compact structure, easy operation and maintenance, suitable for water, solvents, acids and natural gas and other general working media, but also suitable for poor working conditions of the media, such as oxygen, hydrogen peroxide, methane and ethylene. Ball valve body can be integral, can also be combined.

     Three-piece ball valve is a relatively new type of ball valve category, it has its own structure has some unique advantages, such as no friction switch, seal is not easy to wear, small opening and closing torque. This reduces the size of the configured actuator. With a multi-turn electric actuator, the medium can be adjusted and tightly cut off. It is widely used in petroleum, chemical industry, urban water supply and drainage and other conditions requiring strict cut-off.

Structural Characteristics:

1. Frictionless opening and closing.

2. Top type structure. The valve installed on the pipeline can be directly checked and repaired online, which can effectively reduce the device parking and reduce the cost.

3. Single seat design. The problem that the medium in the valve cavity is affected by abnormal pressure increase is eliminated.

4. low torque design. The stem with special structural design can be easily opened and closed with a small wheel valve. 

5. Wedge sealing structure.

6. Self-cleaning structure of sealing surface. When the ball tilts away from the seat, the fluid in the pipeline passes 360° evenly along the sealing surface of the ball.

Technical Parameters:

Product Dimension: